Composition:
100 g solution contain the following active substances: 93.9 g Reaction product of DMO-THF, ethanol and water.
Labelling according to Regulation (EC) no. 648/2004:
< 5 % phosphonates, < 5 % anionic surfactants, < 5 % non-ionic surfactants, perfumes, Methyl isothiazolinones.
Chemical-physical data
Density:ca. 1.01 g/cm3 / 20 °C
Color:green
Form:liquid
Viscosity, dynamic:No data available
Flash point:38.5 °C / Method : DIN 51755 Part 1
pH:6.3 - 6.6 / 20 °C
- broad microbiological spectrum
- tested under high organic load, therefore suitable for treatment of heavily contaminated instruments
- outstanding material compatibility
- 14 days standing time
| Additional Features | Instructions for use
For professional use only.
gigasept® FF (new) is a concentrate and is diluted with cold water to produce the desired application concentration. Application example: 1 litre of a 6 % working solution corresponds to 940 ml of water and 60 ml of gigasept® FF (new). Place endoscopes and instruments for reprocessing in the gigasept® FF (new) solution. Ensure complete covering of the surfaces, also of hollow instruments, and allow to take effect. Rinse all instruments thoroughly after disinfection, using water of at least drinking water quality, or preferably sterile distilled water or fully deionised water, to completely remove residues of the solution. Please follow the reprocessing recommendations of the instrument manufacturers. Standing TimeThe working solution can be used for 14 days, for the disinfection of previously cleaned instruments only. National regulations may limit the timespan during which the solution can be used. Microbiological efficacy
|
|---|
AHP Medical supplies health professional , business & home users
* Debit/Credit Card Payments Accepted
* NHS or Company Purchase Order - email accounts@ahpmedicals.com
* Delivery to Private or Commercial Addresses
* Established 2001
Write Your Own Review